Here at Roco, we have recently discovered a minor issue when the SKED stretcher is updated with Cobra buckles. The Cobra buckle replacement system is attached by girth-hitching the components into the grommets. The girth hitch takes up more room in the grommets than the sewn loop that was previously used. This makes it more difficult to pass the vertical bridle rope through the grommet holes that we’re accustomed to using.
Skedco was contacted and has approved the following alternative method (see photo). After tying a square knot at the bottom of the SKED, bring the tail ends of the rope back up and pass them through the bottom grommet hole of the handles before tying the second square knot. Note: “Handle” holes may be used with the old style buckle system.